Composite Deck Installation
Trex, TimberTech, and other capped composite boards. No staining, no splinters, decades of warranty. Highest upfront cost, lowest lifetime cost in PNW climate.
Decks Contractor · Vancouver, WA
Deck Builder & Contractor in Vancouver, WA - Composite, Cedar & Pressure-Treated
Quality Master is a deck builder and deck contractor designing and building composite, cedar, and pressure-treated decks across Vancouver, WA and all of Clark County. We coordinate with our roofing crew on covered decks and pergolas so the structural tie-ins flash properly into the existing roof - that's the detail most deck builders miss.
Quick Answer
Decks services from Quality Master, at a glance
Quality Master is a full-service deck builder and deck contractor in Vancouver, WA. We build composite (Trex and similar), cedar, and pressure-treated decks across Clark County - including railings, stairs, covered patios, pergolas, and deck repair. Decks above 30 inches require a Clark County permit, which we pull. Composite decks cost more upfront but eliminate the staining cycle that PNW cedar requires. Free written estimate on every deck project in Vancouver, WA.
- Service area: All of Clark County, WA
- Materials: Composite (Trex, TimberTech), cedar, pressure-treated
- Permit threshold: Decks above 30 inches require a Clark County permit
- Railing options: aluminum, cable, glass-panel, composite top-rail
- Tie-in to existing roof for covered decks (we coordinate with our roofing crew)
- Phone: 360-726-0785
Deck scope
Composite, cedar, pressure-treated - plus rails, stairs, and covered builds.
Cedar Deck Construction
Western red cedar - beautiful natural grain that can last decades with proper sealing. Best for owners who want the traditional look and don't mind annual maintenance.
Pressure-Treated Decks
Budget-friendly and structurally strong. Most common choice for low-elevation decks, pool surrounds, and decks that will be painted or stained.
Railings & Stairs
Aluminum, cable, glass-panel, or composite top-rail systems. Code-compliant stairs with proper rise/run, handrails, and lighting integration where requested.
Covered Decks & Pergolas
Our roofing crew handles the roof tie-in, flashing, and membrane work - so a covered deck integrates into the existing roof without leaks. Most deck builders sub out this part. We don't.
Deck Repair & Refinishing
Rotted boards, loose railings, sagging stairs. Often we can fix what's there instead of a full rebuild - depends on the joist and ledger condition.
Deck materials
Composite vs cedar vs pressure-treated - the long-term math.
PNW climate is hard on wood decks - wet winters, UV-heavy summers, and freeze-thaw cycles cause wood to cup, crack, and rot if not maintained. Composite eliminates the maintenance burden but costs more upfront.
Composite (Capped Polymer)
Trex Transcend · Trex Enhance · TimberTech AZEK · TimberTech PRO
PVC-and-wood-fiber boards with a polymer cap. No staining ever, won't splinter, won't rot. Top-tier composite is rated for 25-50 year limited warranties.
Lifespan
25-50 years (manufacturer warranty)
Pros
- No staining or sealing, ever
- 25-50 year limited warranty (varies by line)
- No splinters - kid- and pet-friendly
- Wide color palette
- Highest resale value
Trade-offs
- Higher upfront cost than pressure-treated
- Some lines get hot in direct sun (lighter colors better)
- Premium look, not the natural-wood look some owners want
Western Red Cedar
PNW-sourced cedar (kiln-dried clear or knotty)
Beautiful, naturally rot-resistant wood with classic PNW look. Lasts 20+ years with proper sealing every 2-3 years.
Lifespan
15-25 years with maintenance
Pros
- Authentic natural wood look
- Naturally rot- and insect-resistant
- Cooler underfoot than composite in summer
- Can be stained any color
Trade-offs
- Requires sealing every 2-3 years
- Will splinter, crack, and gray without maintenance
- 15-25 year typical PNW lifespan with maintenance
Pressure-Treated Lumber
ACQ-treated Southern Yellow Pine
Chemically-treated softwood that resists rot and termites. Most cost-effective deck material. Often used for framing on composite decks (joists, beams) even when the surface is composite.
Lifespan
15-20 years
Pros
- Lowest installed cost
- Strong structural lumber for framing
- Can be painted or stained
- Widely available
Trade-offs
- Will warp, cup, or split over time
- Requires staining/sealing maintenance
- Greenish tint when fresh (fades in 6-12 months)
- Shorter lifespan than cedar or composite
Deck process
Design consult, permit, footings, framing, finish.
Typical timeline: 1–3 weeks for most decks.
- 1
Design Consult & Site Visit
We meet on site to talk about size, layout, materials, railings, and tie-in to the house. Most consults take 45–60 minutes.
- 2
Plans + Written Estimate
We sketch the deck, calculate framing, and write an itemized estimate. For permitted work (decks above 30"), we prepare the permit submittal.
- 3
Permits & Materials Order
Permits pulled through Clark County (or the relevant city). Composite materials usually 2–3 week lead time; cedar and pressure-treated typically faster.
- 4
Demo (if Replacement) & Footings
Existing deck removed where applicable. Concrete footings dug and poured per code (typically 30" deep below frost line in Clark County).
- 5
Framing, Decking, Railings
Pressure-treated framing, joist hangers, ledger flashing into the house, then deck boards and railing system. Stair construction with code-compliant rise/run.
- 6
Final Walk + Inspection
We coordinate the final permit inspection and walk the project with you. You get the inspection card plus our workmanship warranty.
Real Projects
Recent decks projects in Clark County, WA
Roof Replacement·Camas
Roof Replacement in Camas, WA - March 2026
Full tear-off and replacement on a Camas hillside home - architectural asphalt shingles plus seamless aluminum gutters in a copper finish to match the trim package.
View photos
Roof Replacement·Vancouver
Roof Replacement in Vancouver, WA - February 2026
Tear-off and replacement on a two-story Vancouver home set back among mature firs. Warm-brown architectural shingles to fit the wooded setting, with attention to ventilation and shade-side moss prevention.
View photos
Roof Replacement·Battle Ground
Roof Replacement in Battle Ground, WA - January 2026
Multi-gable tear-off and replacement on a rural Battle Ground property. Heavy architectural shingles for wind exposure, plus full ridge venting and re-flashed chimney.
View photos
Deck reviews
Backyards built to last in Pacific Northwest weather.
5/5 across 30+ verified Google & Yelp reviews - these are tagged to deck work specifically.
"The owner checks on progress each day and doesn't sign off on the project until he personally inspects it. All employees are respectful of the property and thorough clean up is done daily."
"Clean work, the details always look very clean. Employees follow safety guidelines and regulations. The pricing is the most just pricing you can get out there."
"Came out quickly. Very professional and did a good job as promised. Very communicative and finished the job quickly and cleanly."
"It was great, very nice people to work with and took care of the items I needed."
Deck FAQ
Materials, permits, lifespan, and what is under the surface boards.
13 of the most common deck questions we hear from Clark County homeowners.
How much does it cost to build a deck in Vancouver, WA?
Free written estimate per project. Pricing varies with deck size, material (pressure-treated, cedar, or composite), railing system, stair complexity, and whether the deck is covered or tied into the existing roof. Contact us for a quote on your specific deck project in Vancouver, WA.
Do you do deck repair in Vancouver, WA?
Yes - alongside new deck building, we do deck repair throughout Vancouver, WA. Rotted boards, loose or out-of-code railings, sagging stairs, and failing ledger connections are the common ones. If the joists and ledger are sound we often repair or re-surface instead of rebuilding; if the framing is compromised we'll tell you straight.
What deck material lasts longest in the PNW?
Capped composite (Trex Transcend, TimberTech AZEK) - typically 25-50 year warranties and no maintenance beyond rinsing. Cedar lasts 15-25 years with consistent sealing every 2-3 years. Pressure-treated 15-20 years with stain.
Do I need a permit for a deck in Clark County?
Decks above 30 inches off the ground require a permit in Clark County and the incorporated cities. We pull the permit and coordinate inspections. Decks below 30 inches and small floating platforms typically don't require a permit but should still meet code.
Can you replace just the deck boards and reuse the frame?
Sometimes yes - depends on the joist and ledger condition. We inspect the structure first; if it's sound, a board-replacement saves real money over a full rebuild. If the framing is rotted or undersized, we tell you straight.
Do you build covered decks and pergolas?
Yes. Covered decks, attached pergolas, and screened-in setups. Our roofing crew handles the roof tie-in, flashing, and shingle integration so the new structure flashes properly into your existing roof.
How long does a deck project take?
A standard 200–400 sq ft rear deck is usually 1-2 weeks from demo to final. Larger or covered builds run longer. We coordinate weather windows and notify you of the schedule before crew arrives.
What's the difference between Trex and TimberTech?
Both are top-tier capped composite. Trex Transcend and TimberTech AZEK are flagship lines with similar 25-50 year warranties and color ranges. We'll spec based on color preference and which line has the better local distributor for your timing.
Can you build a deck on a sloped lot?
Yes - many Camas, Felida, and Washougal homes have sloped backyards that need stepped or multi-level decks. We engineer footing placement and step-down framing to fit the grade.
What railing options do you install?
Aluminum (durable, low-maintenance), cable rail (modern look, less obstructive view), glass panel (premium, view-preserving), and composite top-rail with aluminum balusters (matches deck surface). All to code height (42" for residential).
Can you install lighting in the deck?
Yes - recessed deck-board lights, post-cap lights, and rail lighting are common adds. We coordinate with a licensed electrician for any new electrical runs or sub-panel taps.
What's under the surface boards on a composite deck?
Pressure-treated framing - joists, beams, and ledger. The composite top sits on the PT framing. PT is best-in-class for structural members because it resists rot and supports load. Composite covers it for the visible surface.
Do you remove old decks?
Yes. We demo the existing deck, haul off the debris, and assess the foundations. Sometimes we can reuse existing footings if they're properly sized and undamaged; usually we install new footings to current code.
Beyond Decks
Other exterior work we do alongside deck.
Roofing
Quality Master Roofing & Remodel is a family-owned roofing company in Vancouver, WA.
Siding
Quality Master is a James Hardie certified siding contractor and full-service siding company serving Vancouver, WA and all of Clark County.
Windows
Quality Master handles window installation and window replacement across Vancouver, WA and all of Clark County.
Clark County, WA
Decks across Clark County.
We're based in Vancouver and serve every city and unincorporated community in Clark County. Click your area for deck-specific work we've done there.
Decks in Clark County, WA
Cities
Decks in Vancouver, WA
Decks in Camas, WA
Decks in Washougal, WA
Decks in Battle Ground, WA
Decks in Ridgefield, WA
Decks in La Center, WA
Decks in Yacolt, WA
Neighborhoods & CDPs
Free deck design consult.
Free inspection. Drone documentation. Written deck scope and a real number, no pressure to decide on the spot.